CE Handheld 6-Parameter Vital sign Monitor Patient Monitor ECG NIBP Spo2 PR Temp

Description

Description:
Introduction for Palm Patient Monitor
RPM-8000B Palm multi-parameter patient monitor has super high quality and very competitive price.
All-in-one designed module with 5 standard parameters: ECG, NIBP, SPO2, Pulse Rate and Temperature.
Free matched two sets advanced software is for data downloading and tele-monitoring, and has convenient & rapid Bluetooth printer can print datas and ECG waveform.
This machine can meet all requirements, and meet requirements of hospital & other departments in emergency treatment, first-aid, rescue,etc.
Function
for Palm Patient Monitor
Touch screen,5.1 inch color TFT LCD, simple for operating, quickly&accurately measure the data;
Build-in rechargeable Li-battery, up to 15hours running time, support AC and DC power;
Adjustable audible and visual alarms, and sensor off alarm;
Long time monitoring and sleeping monitoring;
Easy to carry, suitable for ambulance center, has the stand for fixing;
Prior:
Storage and review data up to 9999 user ID and 3888groups via Trend Graph and Trend List.
USB and Bluetooth data upload;
Horizontal and vertical display selectable;
Big font screen interface is easy to observe;
Back light can be adjusted;
Free advanced software
Optional Bluetooth printer to print the waveform and data out.
Specifications
Following is the specifications, which has complete configuration of ECG,TEMP, NIBP and SpO2.
1. General Specifications:
Size: 209mm×104mm×47.5mm
Net Weight: 655g
Display Specification
Measurement Display: color TFT- LCD/touch screen
Power Supply Indicator: Dual-color LED (red/green)
Charging indicator: A green LED
2. Power Supply
AC Power Adaptor
Input: 100～240VAC, 50/60Hz, 0.7A
Output: DC 5V, 1.5A
Battery
Li-ion rechargeable battery, 3.7V,/7200mAH
Operating Time: 15 hours with full battery capacity.
(Condition: 25℃, NIBP working period is 15 minutes)
Recharge Time: 10 hours.
3. Environment
Temperature
Working:0
℃
～45
℃
Transport and Storage: -25
℃
～85
℃
Humidity
Working:30% ～85 %
Transport and Storage: 30% ～95 % (no condensation)
4. Monitoring Parameter
ECG
Input：3- lead ECG cable, standard AAMI cable connector
Lead Selection：I，II，III
Gain Selection：×1，×2，×4，×8
Sweep Speed: 12.5, 25, and 50 mm/s
Frequency Response: None filter: 0.05～100Hz (-3dB), filter: 0.5～40Hz (-3dB)
Calibration Signal: 1mV square wave
Protection: Against electrosurgical interference and defibrillation
Heart Rate
Measuring Range: 20 bpm～300 bpm
Renew Time: 1 time per beat
Accuracy:
±
1 bpm
Alarm Mode: Audible and visual alarm
SpO2
SpO2%
Measuring Range:0%～100%
Resolution:1 %
Accuracy:
±
2 %(90%～99%),
±
3 %(70%～89%),unspecified (0%～69%)
Pulse Rate
Measuring and Alarm Range:20～300bpm
Resolution:
1bpm
Accuracy:
±
1bpm
NIBP
Method: Oscillometric
Mode: Manual, Auto, STAT
Measuring Interval in AUTO Mode: 1, 2, 3, 5, 10, 15, 20, 30, 45, 60 (min)
Measuring Period in STAT Mode: 5 min
Cuff Pressure Range:0 mmHg～300mmHg
Pulse Rate Range:30 bpm～250bpm
Measurement Rage: Adult 30 mmHg～255mmHg, Pediatric 30 mmHg～160mmHg
Over-pressure Protection: Adult 300mmHg, Pediatric 220mmHg
Pressure Resolution
: 1mmHg
The SYSTOLIC and DIASTOLIC values measured using this device shall be equal to those measured by trained medical personnel using cuff and stethoscope. The MEAN value measured using this device is equal to that measured using blood pressure measurement device.
Temperature
Input: Body surface thermal-sensitive resistor temperature sensor
Measuring Range: 0℃～50℃
Accuracy:
±
0.1℃
5. Storage and Review
Maximum Data Quantity: 3888 groups
Maximum Trend Time: Continuous 129.6 hours
6. Printer (optional)
Type: Thermal micro-printer
Printer Paper: 58 mm thermal paper,Paper roll diameter≤Φ 33mm
Interface: Bluetooth wireless interface
Recording Types: Real-time printing and review data printing
Power Supply:
Rechargeable battery 1700mAh~2000mAh.7.2V.
Charge(discharge) ≧1000times.
Charge time: 2hours
Work Operation/relative humidity：0～55℃/10～80%RH
Storage Operation/relative humidity：–20～60℃/10～90%RH
Packing list
- Color palm patient monitor main unit
1 pc
- 3-lead ECG cable ( include surface TEMP probe)
1pc
- Adult finger SpO2 sensor
1 pc
- Adult NIBP cuff
1 pc
- NIBP extension tube
1 pc
- AC power adaptor
1 pc
- The operator’s manual
1 pc
Selectable Accessory
- Pediatric finger Spo2 sensor
- Neonatal wrap SpO2 sensor
- Bluetooth printer
The following FDA Disclaimer is required for all eBay listing in Healthcare category and is included for REFERENCE:
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory
agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, We
will verify your status as an authorized purchaser of this item before shipping of the item.
(Seller Name: Juanita Jiang;Country: China;City: Beijing;TEL.:86-15701236598).
This item has been cleaned and treated according to the manufacturer's instructions.
Payment
We accept payment by
PayPal
. PayPal enables you to make payment quickly and securely online.
1: We only accept payment via PayPal.
2: Please pay the money within 5 days after the auction ended.
3: Please offer home or mobile phone when the item's Value exceeds 100 (USD, EUR, AUD, GBP) so that we can make sure you get the item safely.
Shipping
All items will be shipped by e packet or Airmail post within 1 business days.
The trade is cross-border and Airmail is the cheapest post way, so it take a long time for delivery. If you don't want to wait so long time, please kindly contact us for other shipping method. Meanwhile, we offer other choices in the shipping method which you can choose yourself.
We are not Responsible for your Customs duty.
We don't add taxes, VAT or other hidden charges. You pay us what you see on the invoice, i.e. goods subtotal + shipping cost (not include duties). Please find out as much as you can about your import taxes in your own country before bidding the item. You need to pay for the import duties in case that occurred for certain goods.
Terms of sale
l
About Warranty:
We guarantees new equipment other than accessories to be free from defects in workmanship and materials for a period of twelve months (six months for spare parts) from the date of shipment under normal use and service. Our company's obligation under this warranty is limited to repairing, at our company's option, any part which upon our company's examination proves defective.
l
Return Policy
If you receive a defective item which you want to return, please contact us within 2 days from the day you receive the item. All return items must be returned with its original packaging and accessories. If we confirm the damage happened during the shipment, we will bear the shipping cost for return.
We will refund the money to you when we get the return items. Or replace item for you free of charge.
About Us
We are the manufacturer and distributor of medical equipments for more than 10 years.
If you are interested in the distribution work, please feel free to contact us.
We will reply to you within 48 hours.
Please kindly wait for us.